Widget HTML Atas

Home / R Driver Iii Sata Cable Software Free Download

R Driver Iii Sata Cable Software Free Download

Post a Comment
Jun 11, 2003
2
0
18,510
0
  • #1
I have a USB 2.0 IDE/SATA cable/interface, (HW-338?), which gets detected by my Win XP (SP3) system, but is declared as an unknown device. Therefore, an IDE or SATA drive plugged into it are not seen. (The drives do run up ok, via the separate power supply).
No driver cd was supplied with the device, and the vendor insists that I don't need a driver for Windows XP.

(The black plastic device has 2.5" and 3.5" drive interface connectors back-to-back, a SATA connector near one end of the body, and a sparkly silver USB cable coming out of the other end.

Can anyone advise me, or point me in the direction of a solution? ...Please?

AndySwain

rand_79
Apr 10, 2009
829
0
19,010
23
  • #2
try it on another computer, and it has a power cord you are plugging in too right?
cesareDH
Nov 19, 2011
1
0
18,510
0
  • #3
I have a USB 2.0 IDE/SATA cable/interface, (HW-338?), which gets detected by my Win XP (SP3) system, but is declared as an unknown device. Therefore, an IDE or SATA drive plugged into it are not seen. (The drives do run up ok, via the separate power supply).
No driver cd was supplied with the device, and the vendor insists that I don't need a driver for Windows XP.

(The black plastic device has 2.5" and 3.5" drive interface connectors back-to-back, a SATA connector near one end of the body, and a sparkly silver USB cable coming out of the other end.

Can anyone advise me, or point me in the direction of a solution? ...Please?

AndySwain

Mine says that after you hook it up you need to go into computer management>disk management and assign a drive letter.

  • #4
I have a similar device, USB2SATAIDE from startech.com and I see it under disk management, but it states "Disk 1; Unknown; Not Initialized" When you try to Initialize it states "Device not ready". I've rebooted with the hard drive attached and it won't work, get the same issue. Have the Startech drivers, tried to use any one of those and Win 7 pro just comes back with "Disk Drive" as the type of device and the current drivers, still doesn't work. Device Manager sees it as a USB Device under Disk Drives. I've tried different hard drives, and different computers, all state the same issue. I'm guessing all the different hard drives I've tried are not bad drives. I was able to load Windows onto one when it was the main hard drive, but will not run as a USB attached device.
Romanticapped
Feb 16, 2013
69
0
10,640
3
  • #5
I have a USB 2.0 IDE/SATA cable/interface, (HW-338?), which gets detected by my Win XP (SP3) system, but is declared as an unknown device. Therefore, an IDE or SATA drive plugged into it are not seen. (The drives do run up ok, via the separate power supply).
No driver cd was supplied with the device, and the vendor insists that I don't need a driver for Windows XP.

(The black plastic device has 2.5" and 3.5" drive interface connectors back-to-back, a SATA connector near one end of the body, and a sparkly silver USB cable coming out of the other end.

Can anyone advise me, or point me in the direction of a solution? ...Please?

AndySwain

Romanticapped
Feb 16, 2013
69
0
10,640
3
  • #6
Here is the usual solution: Ignore the instruction sheet where it says to set the drive as MASTER. This almost never works and your system will not recognize it. To fix the problem set the drive you are trying to use at the standard CABLE SELECT setting. Then plug the USB cable back into your computer it should recognize it without a problem after a second.
(Romanticapped)
Mar 23, 2013
1
0
10,510
0
  • #7
In my case where I encountered "Device not ready" I had to try it a couple of times. unplug all cables. Then plug the Ultra adapter power cable into the drive. It won't spin up because it's already warm. Then re-plug the usb into the laptop, at that point, the drive starts spinning up, and drive is recognized as initialized in Disk Management.

-awgtek

  • #8
same problem i faced when i try to connect my pata hdd with usb-ide cable, after many experiments i found solution,

just make hdd pins jumper to "cable select" and all set, enjoy.

FreedomRydr
  • #9
I have 7 external drives. All worked on Win7. When I 'upgraded' to Win10, the 4 drives connected by SATA/USB adapters, are not recognized. The USB ports all work fine. The drives are not all 'dead', all at once. The Disk Mgmt allots a space and assigns a drive letter, but does not read the drive, reporting 'no media', as if it is a card reader. The Device Manager sees the adapter, but not the drive. I can only assume that it is a driver issue for the adapters, although Dev Mgr 'update driver' reports it has the most current drivers. So is this just another of the many issues that Win 10 has yet to resolve? Curiouser and curiouser….
Romanticapped
Feb 16, 2013
69
0
10,640
3
  • #10
most likely, yes, it is a Win 10 problem combined with the touchy interface. Are the external drives capable of being set to 'cable select?' I tried the Win 10 upgrade and my DVD/CD player refused to be recognized no matter what I tried though it worked just fine in Win 7. Win 10 seems to have other driver issues as well including sound and video on different systems. It may take a few months for Microsoft to figure it all out. You are aware of the default 'information gathering' in Win 10 also I hope. Best to wait on the upgrade and go back to 7 for now, though I do like the look and feel of 10 better than 8.1 It just takes too much control away from the user at this point and is full of errors yet.
Jul 31, 2013
1
0
10,510
0
  • #11
I have a USB 2.0 IDE/SATA cable/interface, (HW-338?), which gets detected by my Win XP (SP3) system, but is declared as an unknown device. Therefore, an IDE or SATA drive plugged into it are not seen. (The drives do run up ok, via the separate power supply).
No driver cd was supplied with the device, and the vendor insists that I don't need a driver for Windows XP.

(The black plastic device has 2.5" and 3.5" drive interface connectors back-to-back, a SATA connector near one end of the body, and a sparkly silver USB cable coming out of the other end.

Can anyone advise me, or point me in the direction of a solution? ...Please?

AndySwain

Mine says that after you hook it up you need to go into computer management>disk management and assign a drive letter.

Have just found that assigning the drive letter was stopping my disc from showing up in the windows environment. Even though the drive had just been formatted using windows management tool.
After drive letter assigned the disc shows up as a Hard Disk and is now available to the Alienware respawn program, which it did not do before.

PLEASE MARK AS SOLUTION; cesareDH

  • #12
same problem i faced when i try to connect my pata hdd with usb-ide cable, after many experiments i found solution,

just make hdd pins jumper to "cable select" and all set, enjoy.

Thank you!

I´m just moving from XP to Windows 7.

Pin Jumper to "Cable Select" did the trick. My HDD is working now.

Thank you!

Jan 16, 2019
1
0
10
0
  • #13
Hi, in my case what I found is the SATA to USB adapter doesn't work in 3.0 ports. I connected the adapter to a non blue usb port, and it worked instantly.
I'm using Windows 10 and I didn't install any additional driver
Romanticapped
Feb 16, 2013
69
0
10,640
3
  • #14
Hi, in my case what I found is the SATA to USB adapter doesn't work in 3.0 ports. I connected the adapter to a non blue usb port, and it worked instantly.
I'm using Windows 10 and I didn't install any additional driver

It's because the adapter dosen't support very high speed transfer, these adapters (in my experience) tend to be a bit touchy / glitchy at times. Hopefully there are better ones out now.

Thread starter Similar threads Forum Replies Date
E Question External hard drive enclosure cable Storage 2
Cyber_Akuma Question Questions about reliable SATA Extender and Mini-SAS-to-SATA cables Storage 2
Shahab Eskandary Question How to recover lost files during the transfer from an android phone to windows10 via USB cable? Storage 1
A Question Is there a way to connect HDD without having Power cable ? Storage 1
D Question Is it OK to use SATA 1 cable on SATA 3 Storage 6
MPhilMCP Question Connector cable for Toshiba E310490 Portable HDD ? Storage 0
19961209.saijtha Question How to connect sata cable pin to usb cable pin? Storage 6
1muf Question Is it ok to bend my sata power cable like this? Storage 15
D Question SOLVED - Got a new modular PSU, forgot to swap SATA power cables - HDD dead. Possible fix? Storage 4
D Question 5v argb to micro b cable Storage 0
  • Advertising
  • Cookies Policies
  • Privacy
  • Term & Conditions
  • Topics

Posted by: melidahaggerton.blogspot.com

Source: https://forums.tomshardware.com/threads/usb-2-0-ide-sata-cable-interface-driver-required.647771/